Lifting Projects

Our gallery of past projects will give you an idea of the breadth of experience and service offered by Mona Lifting. Click on any of the photographs to enlarge and read more.

Lift Shaft Beams, Wood Wharf, Canary Wharf, London

May 2018

Customer: Lodige

Location: Wood Wharf, Canary Wharf, London

Scope of work:

  • To design, manufacture and install runways beams with corbal bracket fixings to side wall of two lift shafts
  • Capacity: 160 kN x 2 No., 50 kN x 1 No. and 25 kN x 2 No. per shaft
  • Work to be carried out to BS 2853
  • Steelwork blast cleaned and three coat epoxy paint system applied

All beams tested and certified according to LOLER.

Windmill Safety Attachment Point Inspection

Mona Lifting were called upon to inspect safety harness attachment points on a windmill – Melin Llynnon, Ynys Mon, makes a change to usual work carried out on modern wind turbines!

80t Hook – Windfarm Scotland

Mona Lifting Ltd were commissioned to manufacture, test and certify a 80t Flange Hook to customer specifications, with polyurethane coating to complete the hook.

The 1.3m high fully welded Lifting Hook was fabricated and NDT and delivered to the customer on time and within budget.